Diamond Z11
Diamond Z11
Diamond Z11 wraps its chamber in glass on two sides, the panels meeting at a corner stripped back to a single pillar — a cube that leaves the hardware open to view from wherever you stand.
Beyond its open frontage, it fits a full ATX build into 425 × 280 × 420mm: a 410mm card and a 160mm cooler under a 360mm top radiator, with ten 120mm fan mounts across four zones for airflow you set yourself, a bottom rail finished in polished metal for a chassis that reads as sitting above its surface, and one 3.5-inch plus three 2.5-inch drive mounts for storage that never shows.
Every detail is engineered to combine an open view, full-size clearance and a footprint that still fits the desk in one glass-wrapped cube.
Diamond Z11
0.6mm Class A SPCC, Finished Matte
Class A SPCC at 0.6mm keeps the shell light for the volume it encloses, and every face is finished matte so the frame never competes with the light inside.

Two Panels, One Corner, No Wall
Glass runs along two sides of the chamber, meeting at a corner pared down to a single pillar — the build stays open from either standing side, with nothing between you and the board.

Cube Proportions, Full-Size Inside
425 × 280 × 420mm on the desk, but an ATX board, a 410mm card and a 160mm cooler all fit, with seven expansion slots behind them.

A Column of Light Behind the Glass
Three 120mm fans stand in a vertical line behind the front glass, their glow running from the top of the chassis down to the floor without a break. Set to the same tone, the column reads as a single lamp rather than three fixtures. Set them individually, and each layer of the build gets its own edge.

Ten Mounts, Four Zones
Three up top, three at the bottom, three behind the glass and one at the back — the airflow budget is yours to spend, with room for a 360mm radiator across the top.

Standing on a Line of Metal
A polished rail runs under the front edge and the chassis rests on a chamfered foot, so the mass reads as sitting above its surface rather than on it.

Fans Are Your Call
No fans ship with the chassis: all ten 120mm positions are options, so the airflow you end up with is the airflow you actually wanted.

Ports Along the Top
One USB 3.0, one USB 2.0, a Type-C and HD audio sit along the top edge — the front stays nothing but glass.


Color Options

Black

White
Technical Spec
Model NO | Diamond Z11 |
Product size | 425*280*420mm(L*W*H) |
Material | Classs A SPCC 0.60MM |
M/B Support | ATX/M-ATX/Mini-ITX |
I/O port | USB3.0*1,USB2.0*1, Type-C*1, HD AUDIO |
3.5'HDD | 1*3.5'HDD |
2.5'SSD | 3*2.5'SSD |
PCI-E Slots | 7 |
| FANS HUB | / |
Air Cooling | Back : 1*120mm (Option) Top : 3*120mm (Option) Right Side : 3*120mm (Option) Bottom : 3*120mm (Option) |
Liquid Cooling | Top : 360mm water-cooling (Option) |
CPU Cooler | 160mm |
Graphics Cards | 410mm |
Power Supply | ATX |
EAN | Diamond Z11 BK : 6973574165205 Diamond Z11 WH : 6973574165212 Diamond Z11 Plus BK : 6973574165229 Diamond Z11 Plus WH : 6973574165236 |