Wind Shell G6
Wind Shell G6
Wind Shell G6 wraps a compact 365mm body in a steel mesh front and a wood-grain strip that carries the ports — one panel doing the cooling, the other doing the furnishing.
Beyond that surface, the body holds what a real build needs: a 310mm card and a 165mm cooler inside 365mm of depth, two 2.5-inch mounts and one 3.5-inch bay for storage that stays out of the glass, three 120mm LUMA fans already fitted at the front and the rear, and a front I/O of USB 3.0, two USB-A and HD audio set into the wood.
Every detail is engineered to combine a mesh shell, a wood finish and a compact M-ATX layout in one 380mm tower.
Wind Shell G6
Air Mesh G6
Mesh in Front, Wood Below
Two 120mm fans sit behind a steel mesh front, their light read through the perforation rather than beside it. Below the mesh, a wood-grain strip runs the full width and carries the ports, so the one warm surface on the case is also the one you touch. The housing comes in black or white; the wood does not change.

M-ATX in 380mm
365 × 218 × 380mm holds an M-ATX or Mini-ITX board on four expansion slots, with the tempered glass running the full height of the left side so the board is never hidden.

A 310mm Card in a 365mm Body
There are 310mm of card clearance inside a body only 365mm deep, and the front fans sit ahead of the bracket rather than over the card.

Seven Mounts, Three Already Lit
Two at the front, two under the top, two in the floor and one at the rear — seven positions, with two 120mm LUMA fans up front and one at the rear fitted before the box ships.

Three Drives, None in the Open
Two 2.5-inch mounts and one 3.5-inch bay — three drives in total.

Ports in the Wood
USB 3.0, two more USB-A ports and HD audio are set into the wood strip, with the power key at one end and a pinhole reset at the other. The front stays flat because the ports are in the panel, not on top of it.


Color Options

Black

White
Technical Spec
Model NO | Wind Shell G6 |
Product size | 365*218*380 mm(LxWxH) |
Material | Classs A SPCC 0.50 MM |
M/B Support | M-ATX/MINI-ITX |
I/O port | USB3.0*1 ,USB1.0*2 ,HD AUDIO |
3.5'HDD | 2*3.5'HDD |
2.5'SSD | 1*2.5'SSD |
PCI-E Slots | 4 |
Pre-installed Fan | 2*120mm Luma FRGB(front) 1*120mm Luma FRGB(rear) |
Air Cooling | 2*120mm(front) 1*120mm(rear) 2*120mm(bottom) 1*120mm(top) |
Liquid Cooling | / |
CPU Cooler | 165mm |
Graphics Cards | 310mm |
Accessories | / |
Power Supply | ATX |